Menu

Mitsubishi Outlander TPMS Fault

This week Hometyre Milton Keynes attended a job for a customer that needed 2 front tyres replacing on their Mitsubishi Outlander. With this vehicle it is recommended that you replace tyres in pairs.

On arrival at the job i found that the TPMS light on the dashboard was on and a error message on the screen saying TPMS fault. I scanned all the sensors and found that i was not getting a signal from the nearside front. I proceeded to remove the tyre and found that the sensor was broken and rolling around in the wheel.

I programmed a new sensor and fitted it to the wheel, replaced both tyres that needed doing. I then had to pair the new sensor with the car. To do this you first have to plug into the OBD port and send the new sensor code to the ECU. Once this is done, you need to rescan each sensor and drive the car for about 1 mile.

After about 1 mile the TPMS warning light went off.

Another happy customer in Milton Keynes.

 


Buy Tyres Online Here


 
 
UK Mobile Tyre Service

check coverage
in your area

 

we'll call
when it
suits you...

 

Need tyres today?
Call 0333 444 5454

 

Winter to summer tyre swap over? Book your advance fitting date now!

HometyreGroup

Join the conversation
on Twitter

Follow us

YouTube

Hometyre News Like Us on Facebook Follow us on Twitter

Need help choosing?
Call 0333 444 5454